The Vector Digital Output Cannot be Connected to the Tinius Olsen Test Frame

Solutions

1. Check that the digital connection is correctly adapted.

   Vector is available with specific adapter cables for each supported physical digital interface. Ensure the correct adapter is used. See section Technical Guide - Tinius Olsen Digital Protocol.

   Contact your Vector supplier with details on the test frame make and model.

2. Check that Vector is configured for the intended protocol.

   Within the Vector Interface, the Digital Output must be configured to suit the protocol for the Test Frame. See section Configuring the Digital Output Signal.

   Contact your Vector supplier with details on the test frame make and model. An update to Vector may be required to enable the protocol.